N 525E01


Switch/dimming actuator, 8 x DALI, 8 ECGs per DALI output

  • 8 DALI outputs
  • Control capacity for up to 8 DALI-ECGs per DALI output
  • Power supplied to the electronics and the DALI outputs through an integrated power supply unit for 230 V AC
  • Green LED for status display
  • Pushbutton for selecting and switching over 4 DALI outputs respectively between bus and direct mode
  • Yellow LED for indicating which 4 DALI outputs the direct mode is activated for
  • 1 red LED per DALI output for indicating the circuit state or fault (e.g. lighting medium failure) of the connected group
  • Four pushbutton pairs for switching and dimming of 4 DALI outputs in direct mode, functional when 230 V AC is applied (also when no bus voltage is connected and also when bus communication has not yet been started or is interrupted)
  • Selection of identical or individual configuration of all DALI outputs
  • Selectable operating mode per DALI output (normal mode, 1-level or 2-level time-switch mode)
  • Per DALI output with command objects for switching on/off, dimming brighter/darker and setting dimming value
  • Per DALI output optionally with up to 4 add-on status objects (circuit state and lighting medium failure, dimming value status and DALI status)
  • Sending of status objects on request and/or automatically after change
  • Per DALI output with add-on object for time-limited switching on of lighting in night mode (cleaning light)
  • Warning approx. 1 minute before imminent switching off, by dimming to 50% of former dimming value in night or timer mode
  • Adjustable switching on and/or off of a channel through dimming brighter/darker, dimming value when switching on, actuating or dimming a new dimming value, dimming time from 0% to 100%
  • Adjustable behavior on bus voltage or mains voltage failure and bus voltage or mains voltage recovery
  • Add-on object and integrated 8bit scene control for saving and restoring up to 16 scenes per DALI output
  • Integrated bus coupling unit as only half standard bus load
  • Bus connection through bus terminal as well as contact system to data rail
  • Device for mounting on rail TH35 DIN EN 60715


A6V10416587_Switch_dimming actuator N 525E 8x DALI_en


Technical Specifications

Base function ———- DALI
Rated voltage ——— AC 120 V , AC 230 V
Number of channels —2
Switch-off warning —–Yes
Constant light level control —Yes
Dimension width (1 MW = 18 mm) —4 MW


There are no reviews yet.

Be the first to review “N 525E01”

Your email address will not be published. Required fields are marked *